Welcome to Dexsa Utama Indonesia

KYORITSU 4106

Earth Resistance & Resistivity Tester

• Earth resistance measurement with six ranges covering measurements from 0.001 Ω to 200 kΩ
• Earth resistivity (ρ) measurement is automatically calculated after having set the distance between Auxiliary Earth Spikes (Wenner method)
• Automatic and Manual selection of the Test Current Frequency in four bands of 94/105/111/128Hz
In Automatic mode KEW 4106 will select the most suitable Frequency
• Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements
• Up to 800 measurement results can be saved in the memory and recalled on the display
• The stored results can be transferred to a PC by using USB adapter (Model 8212-USB) and the special software “KEW Report”
• Robust design with IP54 protection

Berat1 kg

Specifications

FunctionRangeResolutionMeasuring rangeAccuracy
Earth resistance
Re
(Rg at
ρ measurement)
0.001Ω0.03 – 2.099Ω±2%rdg±0.03Ω
20Ω0.01Ω0.03 – 20.99Ω±2%rdg±5dgt (*1)
200Ω0.1Ω0.3 – 209.9Ω
2000Ω3 – 2099Ω
20kΩ10Ω0.03 – 20.99kΩ
200kΩ100Ω0.3 – 209.9kΩ
Auxiliary earth resistance
Rh, Rs
8% of Re+Rh+Rs
Earth resistivity
ρ
0.1Ω·mm – 1Ω·m
Auto-ranging
0.2 – 395.6Ω·mρ=2×π×a×Rg (*2)
20Ω0.2 – 3956Ω·m
200Ω20Ω – 39.56kΩ·m
2000Ω0.2 – 395.6kΩ·m
20kΩ2.0 – 1999kΩ·m
200kΩ
Series interference voltage
Ust (A.C only) (*3)
50V0.1V0 – 50.9Vrms±2%rdg±2dgt (50/60Hz)
±3%rdg±2dgt (40 – 500Hz)
Frequency
Fst
Auto-ranging0.1Hz
1Hz
40Hz – 499.9Hz±1%rdg±2dgt
Measuring methodEarth resistance: Fall-of-potential method
(currents and voltages measured via the Probes)
Measurement method of Earth Resistivity (ρ): Wenner 4-pole method
Series interference voltage (earth voltage)
RMS Rectifier (between the E-S Terminals)
Memory capacity800 data
Communication InterfaceModel 8212-USB Optical Adapter
LCDDot-matrix 192×64 monochrome
Over-range Indication“OL”
Overload Protectionbetween E-S(P) and between E-H(C) terminals AC280V / 10 sec.
Applicable standardsIEC 61010-1 CAT III 300V / CAT IV 150V Pollution degree 2
IEC 61010-031, IEC 61557-1, 5, IEC 61326-1 (EMC), IEC 60529 (IP54)
Power sourceDC12V : sizeAA manganese dry battery (R6) × 8
(Auto power off: Approx. 5 minutes)
Dimension167(L) × 185(W) × 89(D) mm
WeightApprox. 900g (including batteries)
Accessories7229A (Earth precision measurement),
7238A (Simplified measurement test leads),
8032 (Auxiliary earth spikes [2 spiks/set])×2 sets (4 spikes in total),
8200-04 (Cord reel [4 pcs])×1 set,
8212-USB (USB adapter),
8923(Fuse [0.5A/600V]) × 1 (included), 1 (spare),
9121 (Shoulder strap),
9125 (Carrying case),
R6 × 8, Instruction manual, Calibration certificate

(*1) Auxiliary earth resistance is 100Ω with Rk correction
(*2) Depending on the measured Rg. Interval [a] between auxiliary earth spikes is 1.0 – 30.0m
(*3) This instrument is NOT designed to measure line voltages on commercial powers.

Brosure

KYORITSU 4106

Ulasan

Belum ada ulasan.

Hanya pelanggan yang sudah login dan telah membeli produk ini yang dapat memberikan ulasan.

Click here to assign a widget for this area.