GPS Emlid Reach RS3

The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy.

Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.

We calibrate the inertial measurement unit in each device individually at the factory, so you can get your Reach RS3 up and running right out of the box.

Unaffected by magnetic fields, RS3’s IMU sensors provide robust tilt compensation even when working close to metal structures.

Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.

Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted.

GPS/QZSS, GLONASS, BeiDou, and Galileo

L1C/A, L2C, L1OF, L2OF,B1I, B2I, E1B/C, E5b

Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio.

Compatibility All Emlid receivers
with built-in radio

An option to mix and match RTK receivers within your fleet. You can configure your Reach RS3 to receive corrections from an existing base*.
You can also use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3.

Compatibility Bases with radios that
transmit TRIMTALK 450S**

Berat	30 kg

Brosure

Reach RS3 Datasheet

Ulasan

Belum ada ulasan.

Hanya pelanggan yang sudah login dan telah membeli produk ini yang dapat memberikan ulasan.

Accurate results even with large tilt angles

Survey and stakeout faster No need to check the bubble

Effortless and robust IMU tilt compensation

Calibration-free

Immune to magnetic disturbances

Quick initialization

Rapid and Reliable GNSS receiver

Gets a fix in 5 seconds

RINEX logging and PPP support

Up to 22 hours on 1 charge

Built-in LTE modem

Get corrections from CORS, Reach, or 3rd-party base

NTRIP Base and Rover

Dual-band radio

LoRa 868/915 MHz Base and Rover

UHF 450 MHz Rover

Brosure

Ulasan

Produk Terkait

Masuk

Survey and stakeout faster
No need to check the bubble

Effortless and robust
IMU tilt compensation

Get corrections from CORS, Reach,
or 3rd-party base

NTRIP
Base and Rover

LoRa 868/915 MHz
Base and Rover

UHF 450 MHz
Rover